A management safety walk takes a manager into the field, close to the real work, to observe, listen and act. Done well, it brings to light what indicators do not show. Reduced to an inspection round, it loses its value. The CSI division of C2D Prévention supports managers in these practices through its management training and tailored support. This article sets out what separates a useful walk from a formality, and how to structure it.
126
workers were killed in work-related incidents in Great Britain in 2025/26, 31 of them in falls from a height.
Why does the management safety walk remain relevant in 2026?
The management safety walk remains relevant because the most common cause of fatal injury, falls from a height, relates to conditions that can be observed in the field. In the figures it published on 1 July 2026, the Health and Safety Executive (HSE), Great Britain’s regulator, reports 126 workers killed in work-related incidents in 2025/26. Excluding the pandemic years, it describes this as provisionally the lowest number recorded in a single year. Falls from a height account for 31 deaths, around a quarter of the total, and the average rate across all industries is 0.37 fatal injuries per 100,000 workers.
The management safety walk, which Icsi describes as a safety visit by senior managers, shares its method with the behavioural safety walk (BSW): observe the work, talk with the people, then act. It differs in who leads it, a member of management or supervision. The communication and deviation-handling skills these managers need are covered in C2D Prévention’s Leadership and Safety training, a seven-hour face-to-face course.
| What role does Icsi give to the manager's presence in the field ?
In its Conviction no. 9 of March 2015 (published in French), the Institut pour une culture de sécurité industrielle (Icsi) states that employees follow what interests their manager. According to this text, managers influence behaviour through their attitudes, the dialogue they establish and the resources they make available to teams. Of the seven principles of safety leadership it sets out, the sixth concerns presence in the field to observe, listen and communicate. Another Icsi publication states that spending time in the field is one of the expectations of safety leadership, and Icsi’s report on leadership in safety adds that field visits should be prepared.
To establish where practices stand before launching a programme of walks, C2D Prévention’s safety assessment relies on field immersion, interviews and an anonymous survey.
What turns a management safety walk into a compliance round ?
A walk becomes a compliance round when it is used to check rules rather than to understand real work. In its report on leadership in safety, Icsi cautions against turning the visit into an audit of physical conditions, an informal discussion or a forum. Faced with an unsafe practice, the report advises giving a reminder of general policy rather than reciting the rules, then listening, engaging and motivating people. The visits it describes follow a programme and a methodological guide, and a report is prepared on the results.
Another pitfall is a focus on the individual. In issue no. 23 of its publications on safety culture, dated September 2016, Icsi states that considering each manager as a safety leader and stopping there amounts to an individual approach to safety focused on managers, and that business processes shape what happens in the field. The constraints observed during a walk therefore also stem from the organisation, not only from the team visited.
Would you like to review the prevention of serious accidents in your organisation? Talk to the C2D Prévention team about your sites and your priorities.
| What happens when findings receive no follow-up?
The sixth Icsi principle includes feeding back to the people concerned what was observed in the field. Conviction no. 9 also lists the handling of reports and the sharing of information with teams among the resources a manager provides to them. A walk whose findings remain unanswered therefore fails to deliver two of the levers Icsi attributes to the manager: dialogue and feedback.
Would you like to know how your walks are perceived in the field before relaunching them? C2D Prévention offers a safety assessment that compares what people say with what they do, without being a compliance audit.
How can you structure a useful management safety walk ?
A useful walk is prepared, relies on questions rather than findings, ends with feedback to the team and leads to an action with an owner and a deadline. Before the walk, the manager chooses an area or an activity and clarifies the framework with the team: the aim is to understand the work, not to look for faults.
During the walk, the checklist described by Icsi covers staff conduct, the condition of equipment and the working environment, documentation and posters, and safety management. Icsi also reports a practice in which an operator or technician who does not work directly in the area observed accompanies the manager and brings a fresh perspective.
At the end, the manager feeds back the findings to the team, recognises good practice and records corrective actions with an owner and a schedule for implementation, as in the joint report that Icsi describes.
| How can managers be supported in this practice ?
C2D Prévention’s Leadership and Safety training covers communication techniques, the proportionate treatment of deviations (TPE) and positive feedback, with a link to behavioural safety walks. The tailored support page also presents the management rituals of pre-job briefings, safety talks and Gemba Walks. C2D Prévention is a certified training provider.
To help managers carry out their BSWs effectively and follow them over time, C2D Prévention’s Watson app, an application for reporting field risks, can be complemented by an option dedicated to BSWs.
A management safety walk delivers results when it is prepared, observes the real work, leaves room for dialogue and leads to followed-up actions. Icsi’s publications converge on one point: the manager’s presence sends a message, and findings must receive a response. C2D Prévention supports managers and health and safety teams in these practices, from the initial assessment to manager training, with the Watson BSW option to help them carry out their walks and follow the actions.
Key takeaways
- A management safety walk consists of observing real work and talking with teams, led by a member of management or supervision.
- According to Icsi, it loses its value when it becomes an audit of physical conditions, an informal discussion or a forum.
- A useful walk is prepared, uses a checklist, feeds back its findings to the team and sets actions with an owner and a deadline.
- Constraints observed in the field also stem from the organisation: the walk complements the analysis of processes, it does not replace it.
FAQ
What is a management safety walk ?
A management safety walk is time spent in the field by a manager to observe working conditions, talk with operators and supervisors, then decide on actions. Icsi describes a similar form, the safety visit by senior managers, whose aim is to observe operating conditions on the site. It is intended in particular to check that the fundamental rules are understood, applied and enforced on the ground.
What is the difference between a management safety walk and an audit ?
An audit checks compliance against a standard, whereas the walk seeks to understand the real work and the constraints of the field. Icsi advises against turning the visit into an audit of physical conditions.
Who can lead a management safety walk ?
According to Icsi, safety visits by senior managers may involve several levels of management and usually include the manager directly responsible for the zone or team visited. A health and safety representative may also take part, and an operator or technician from outside the area observed can accompany the visit.
Further reading
To revisit the definition and steps of an observation of real work followed by a conversation.
To understand the weight of frontline supervision in industrial safety.
To place the handling of deviations within a just culture.
See also
C2D Prévention’s four-phase approach, from diagnosis to continuous infusion.
a snapshot, at a given moment, of behaviours and practices in risk prevention.
workshops and talks tailored to your safety days and weeks.
Would you like to structure your managers’ field walks? Discover C2D Prévention’s Leadership and Safety training or talk to our team about your prevention needs.
Sources
Health and Safety Executive. (1 July 2026). 126 workers died in work-related incidents in 2025/26 [press release]. https://press.hse.gov.uk/?p=8247
Health and Safety Executive. (2026). Work-related fatal injuries in Great Britain. https://www.hse.gov.uk/statistics/fatals-overview.htm
Icsi working group “Leadership in safety”. (2013). Leadership in safety, industrial practices. Institut pour une culture de sécurité industrielle. https://www.icsi-eu.org/sites/default/files/2020-07/Icsi_cahier_EN_leadership-safety_2013.pdf
Icsi, Brunel, C. (March 2015). Le leadership sécurité des managers est incontournable pour améliorer la culture de sécurité de l’organisation. Conviction no. 9 (in French). https://www.icsi-eu.org/sites/default/files/2020-08/Icsi_conviction_FR_leadership-securite_2015.pdf
Icsi, Santa-Maria, D. (2016). To improve safety culture, managers must know what is happening in the field. https://www.icsi-eu.org/en/publication/tought-managers-field
Icsi, Promé, M. (September 2016). Promoting safe behavior is not the ultimate challenge when improving safety performance. Our thoughts on safety culture, issue 23. https://www.icsi-eu.org/sites/default/files/2020-07/Icsi_thought_EN_safe-behaviour_2016.pdf
C2D Prévention. (2026). Tailored Support. https://www.c2dprevention.com/en/tailored-support/
C2D Prévention. (2026). Leadership and Safety Training. https://www.c2dprevention.com/en/leadership-and-safety-training/
C2D Prévention. (2026). Assessment. https://www.c2dprevention.com/en/safety-coaching-support/assessment/
C2D Prévention. (2025). What is a Behavioral Safety Walk (BSW)? https://www.c2dprevention.com/en/blog-en/what-is-a-behavioral-safety-walk-bsw/
C2D Prévention. (2026). Application Watson : logiciel HSE de signalement des risques (in French). https://www.c2dprevention.com/accompagnement-securite-et-coaching/application-watson/
